Liquid Level Gage - Series G613

LOGO_LDI Industries

 

LIQUID LEVEL GAGES
FRONT MOUNT - RIGID PLASTIC
SERIES G613, GT613 and GA613

STANDARD MATERIALS:
  • Tough, break resistant, transparent rigid nylon sight offers wide angle viewing
  • Aluminum end blocks and mounting bolts
  • Buna N seals
OPERATING CONDITIONS:
  • Maximum working pressure up to 125 PSI (861.9 kPa) at 70°F (21.1°C)
  • Maximum temperature up to 225°F (107.2°C)
  • Suitable for use with most hydraulic and machine lubricating oils.
CAUTION: Transparent nylon is NOT recommended for use with:
Diesel Fuel, Gasoline, Ethylene Glycol (antifreeze), Polyglycols, Ethyl Alcohol, Methyl Alcohol, Methyl Ethyl Ketone (MEK), Acetone, Isopropanol, Water at 194°F (90ºC) and over, Steam boiler service. For these fluids, our BOROSILICATE sight glasses should be specified.

 

SERIES NUMBER A
INCHES
(mm)
B
INCHES
(mm)

G613 SERIES
SIGHT ONLY

LDI_Dwg_Sight_G613

GAGE SERIES
NUMBER HERE,
AS PER ORDERING
INSTRUCTIONS
-03
(76.20)
1.28
(32.51)
-04
(101.60)
2.28
(57.91)
-05
(127.00)
3.28
(83.31)
-06
(152.40)
4.28
(108.71)
-07
(177.80)
5.28
(134.11)
-08
(203.20)
6.28
(159.51)
-09
(228.60)
7.28
(184.91)
-10
(254.00)
8.28
(210.31)
-11
(279.40)
9.28
(235.71)
-12
(304.80)
10.28
(261.11)

Note: A & B dimensions are common to all series.
Available to maximum length of 72.00 (1,828.80 mm)

 

HOW TO ORDER:

When ordering, specify the following after the series number separating each with a dash (-):

GT613 SERIES
THERMOMETER (50° To 300°F) (10° to 150°C)

LDI_Dwg_Therm_GT613


Use code letters for body material
-A- Aluminum body (standard)
-B- Brass body (optional)
Use code number for seal material:
-1- Buna N seals (standard)
-2- Butyl seals (optional)
-3- Viton A® seals (optional)
-4- Ethylene Propylene seals (optional)
Specify pipe thread size:
-2- 1/4-18 NPTF
-3- 3/8-18 NPTF
-4- 1/2-14 NPTF
-5- 3/4-14 NPTF
EXAMPLE: GA613-06-A-1-3
Where: Means:
GA613 SERIES GA613
06 6.00 (152.40mm) mounting centers
A Aluminum body
1 Buna N seals
3 3/8" NPTF

 

C D
INCHES
(mm)
E
INCHES
(mm)

GA613 SERIES
WITH PIPE ADAPTERS

LDI_Dwg_Pipe_GA613

1/4-18 0.56
(14.22)
1.19
(30.23)
3/8-18 0.56
(14.22)
1.12
(28.45)
1/2-14 0.75
(19.05)
1.12
(28.45)
3/4-14 0.75
(19.05)
1.12
(28.45)

Other series available - Made to order (Minimum order may be required)

  • Pipe adapters with thermometer - (series GAT613)
  • Needle valves - 1/4 to 3/4 NPTF (series GNV613)

Thread options available per special order:

  • 1/2-20 UNF (Standard)
  • 1/2-13 UNC
  • 3/8-24 UNF
  • 3/8-16 UNC
  • M12 x 1.75

View the LDI Industries Series G613, GT613 and GA613 Liquid Level Gages web page.

Web Statistics